Shandong Fengtu IOT Technology Co., Ltd
Sales Manager：Ms. Emily Wang
Cel,Whatsapp,Wechat:+86 15898932201
Email：info@fengtutec.com
Add：No. 155 Optoelectronic Industry Accelerator, Gaoxin District, Weifang, Shandong, China
PRODUCT CENTER
-
Sensors
-
Weather Station
-
Hydrological/Water Quality Monitor
-
Smart Agriculture
-
Road Weather Information System
-
Photovoltaic Inspection
-
Environmental monitoring
-
Plant Physiology Equipment
-
Food Testing Equipment
Recommended articles
- ORP Meter: An Essential Tool for Monitoring and Controlling Oxidation-Reduction Potential in Wastewater Treatment
- FT-B4BS Agriculture Sensors: Holistic Monitoring for Optimal Crop Growth
- Master Online Turbidity Measurement with Online Turbidity Sensor
- All - Round PV Fault Detection with IV Tester
- Comparing Methods with Dissolved Oxygen Sensors: Accuracy, Cost, and Ease of Use
- Decoding Solar Cell Efficiency with Portable IV Curve Tester
Contact us
ORP Meter
Model：FT-SS6
Brand：fengtu
ORP Meter can be used to measure the ORP value of aqueous solution with high precision, which is a cost-effective portable ORP meter.
Get a Free Quote- Product details
- Related products
- Related articles
1. ORP Meter Product Introduction
ORP Meter can be used to measure the ORP value of aqueous solution with high precision, which is a cost-effective portable ORP meter.SS6 model ORP Meter is an electrode method water quality analysis instrument that uses fully digital electrode detection to detect water quality ORP parameters.The instrument is equipped with the self-developed ftiot operating system, which is simple to operate, has stable performance, accurate measurement, and wide detection range.It has a built-in high-capacity rechargeable lithium battery, making it convenient for users to conduct water quality testing at any time in the field or laboratory.
2.ORP Meter host parameters
| Charging input voltage | 4.5V-5.5V |
| Charging current | <2A |
| screen size | 3.5 inches |
| screen resolution | 480*800☆ |
| screen interface | MIPI DSI☆ |
| USB interface | 2 (Supports external expansion of mouse, keyboard, 4G, etc.)☆ |
| Type-C | 1 (Supports external expansion of mouse, keyboard, 4G, etc.)☆ |
| RS485 | 2 (Supports Modbus, json, asc input, etc.) |
| External sensor supply voltage | 12V |
| External sensor supply current | 1A |
| operating system | ftiot (based on Linux-5.4)☆ |
| CPU | 2*Cotex-A7, 650Mhz☆ |
| RAM | 512M DDR3☆ |
| Flash | 8G-64G |
| OpenGL | ES 2.0☆ |
| Wifi | support |
| 4G | Optional |
| button | support |
| capacitive touch screen | support |
| software architecture | B/S☆ |
| web access | Support☆ |
| MTP mode | Support☆ |
| Multiple terminal login | Support☆ |
| IPV6 | Support☆ |
| Sensor communication method | RS485, TCP, UDP, HTTP☆ |
| Data forwarding method | RS485, TCP, UDP, HTTP☆ |
| Remote SSH | Support☆ |
| remote debugging | Support☆ |
3.ORP Meter sensor parameters and configuration
| serial number | name | Measuring range | principle | Measurement accuracy | Configuration | Remark |
| 1 | temperature | 0~50℃ | High-precision digital sensor | ±0.3℃ | ||
| 2 | pH | 0~14(ph) | Electrochemistry (Salt Bridge) | ±0.1PH | ||
| 3 | ORP | -1500mv~1500mv | Electrochemistry (Salt Bridge) | ±6mv | ✔ | |
| 4 | Conductivity | 0~5000uS/cm,0~10000uS/cm | contact electrode method | ±1.5% | ||
| 5 | TDS | 0～20μS/cm (TDS 0-10mg/L) | contact electrode method | ±1.5% | ||
| 6 | salinity | 0-2.5ppt or 0-80ppt | contact electrode method | ±0.05ppt or ±1ppt | ||
| 7 | Sludge concentration | 0～20.000g/L | scattered light method | ±5% (depending on sludge homogeneity) | ||
| 8 | Turbidity | 0~40NTU (low turbidity) | scattered light method | ±1% | Optional | |
| 0~1000NTU (medium turbidity) | scattered light method | ±1% | ||||
| 0~3000NTU (high turbidity) | scattered light method | ±1% | ||||
| 9 | Dissolved oxygen | 0~20mg/L | fluorescence lifetime method | ±2% | ||
| 10 | Ammonia nitrogen | 0~100mg/l | Ion selective electrode method | ±1mg | ||
| 11 | suspended solids | 0~2000mg/L | scattered light method | ±5% (depending on sludge homogeneity) | ||
| 12 | Residual chlorine | 0~5.00mg/L | Ion selective electrode method | ±5% of reading | The accuracy is best when the flow rate is 0.42m/s-0.85m/s. | |
| 13 | Chloride ions | 0-3500.0mg/L | Ion selective electrode method | ±5% | ||
| 14 | Total hardness | 0～1000.0mg/L | Ion selective electrode method | ±10% of reading | ||
| 15 | cod | 0~500mg/L | UV254 absorption method | ±5% | COD and chlorophyll are equipped with automatic cleaners to prevent biological adhesion and avoid light window pollution to ensure long-term monitoring is still stable; the automatic cleaning time and cleaning frequency can be set, and the power consumption is 0.7W | |
| 16 | Chlorophyll | 0~400ug/L | Fluorescence method | R2>0.999 |
Address:https://fengtutec.com/Portable-Water-Quality-Monitor/ORP-Meter.html
Previous Article ：Portable ph meter
Next Article：Conductivity Meter
-
07-072023
Radar flowmeters
The Radar Flowmeter is an all-in-one flow monitoring device with non-contact, continuous detection of flow velocity, water level, flow and other parameters. It is the use of radar plane microwave technology in a non-contact way to detect the flow rate, water level and other parameters of the water b...
-
11-232023
Ultrasonic wind speed and direction meter is gradually replacing the traditional wind measurement instruments
Ultrasonic wind speed and direction meter is an advanced equipment to measure wind speed and direction through ultrasonic waves. Its working principle is to utilize the characteristics of ultrasonic wave propagation in the air to deduce the wind speed and direction by measuring the difference betwee...
-
02-062025
FT - Y6 Shipborne Meteorological Instrument: Precise Weather Monitoring for Ocean Voyages
Accurate meteorological information is crucial for ocean voyages. The Shipborne Meteorological Instrument FT - Y6 is a professional device designed specifically for marine meteorological monitoring.Developed and produced by Fengtu Internet of Things Technology Co., Ltd., its working principle is to...
-
03-112025
Key Sensors for Water Quality Monitoring Stations
Water quality monitoring stations need to obtain real - time data of various water quality parameters, such as pH value, dissolved oxygen, chemical oxygen demand (COD), ammonia nitrogen, etc. Water quality sensors are devices specifically designed to measure these parameters. They can convert the ph...
Hello, my friend！
What kind of support do you need? Our products is sure to satisfy you.
What kind of support do you need? Our products is sure to satisfy you.
Skype
whatsapp
mail