Which is the best manufacturer of reservoir automation monitoring system?

Reservoir automatic monitoring system is a new monitoring technology developed on the basis of traditional reservoir monitoring equipment. It realizes real-time data transmission and processing through computer or communication network. Advanced computer technology is used to establish a database and perform data processing and analysis. to meet the needs of environmental monitoring. Widely used in the field of hydrology.

Which is the best manufacturer of reservoir automation monitoring system? Shandong Fengtuo Technology is a manufacturer of reservoir automation monitoring system, specializing in the production of various water quality monitors and water level flow monitors, welcome to consult!

The reservoir automatic monitoring system has the following characteristics.

① integration of flow measurement, water level observation, rainfall observation and flow rate measurement.

②easy installation and simple operation.

③Stable and reliable work, low operation cost.

④ Easy maintenance.

Technical parameters.

Water level measurement

Distance measuring range: 0.4-40m

Distance measuring accuracy: ±1cm

Distance measurement resolution: 1mm

Interval time: 1-5000min

Flow velocity measurement

Range of distance measurement: 0.15~15m/s

Speed measurement accuracy: ±2%

Velocity resolution: 0.01m/s

Flow rate measurement

Flow rate = average flow velocity x cross-flow section area x correction factor

The average flow velocity is collected by the flow meter, and after the model calculation to obtain the fluid surface velocity

Overflow cross-sectional area is calculated from the water level and cross-sectional information measured by the water level meter

Rainfall monitoring

Measuring range: rain intensity 0~4mm/min

Measurement accuracy: ±0.2mm

Resolution: 0.2mm

Rain-bearing caliber: φ200mm

Power supply mode: solar panel + battery combination power supply

Solar power: 10W/30W (optional)

Battery parameters: DC3.7V 10Ah

Stand height: 4m vertical pole and 3m horizontal arm

Working environment: -20 ℃ ~ 80 ℃ (no icing state)