Search Icon
Weather Station

PRODUCT CENTER

Contact us

Shandong Fengtu IOT Technology Co., Ltd

Sales Manager:Ms. Emily Wang

Cel,Whatsapp,Wechat:+86 15898932201

Email:info@fengtutec.com

Add:No. 155 Optoelectronic Industry Accelerator, Gaoxin District, Weifang, Shandong, China

location:Home>News>Technical Articles>Reservoir water automatic measurement and reporting system recommended a good

Reservoir water automatic measurement and reporting system recommended a good

time:2023-02-24 17:11:35  source:Weather Station viewed:449 time

Reservoir water condition refers to the data of water level, flow rate and flow velocity, which is an important factor to ensure the safe development of reservoirs, and also related to the people's life and production. So it is necessary to do a good job of collecting and processing these data. In practice, the corresponding hardware equipment and software should be selected according to the specific situation to set and maintain the relevant content, so as to effectively improve the efficiency of the whole system operation.


Reservoir water condition automatic measurement and reporting system is a product launched by Fengtuo Technology, model FT-SW3, which can measure water level, flow rate, flow rate and other data in real time. It sends data to various water management departments or users' cell phones through wireless transmission. The main function of the reservoir water condition automatic measurement system is to monitor the reservoir water condition changes at all times and has been prepared for the prevention work. In normal times, its status is often monitored. When there is an abnormal situation in the reservoir, it reports to the competent department and notifies the relevant units in time. It can accurately and intuitively display information, realize remote communication function, and the automatic operation is simple and convenient.


FT-SW3 reservoir water condition automatic measurement and reporting system uses radar sensor, using K-band planar radar to measure water level data in a non-contact way, which is not affected by temperature, sediment, river pollutants and floating objects on the water surface, so that accurate data can be obtained.


The field protection level of this equipment reaches IP68, the signal output is RS485/MODBUS protocol by default, the water level measurement range is 0.4-40m, the measurement accuracy is ±1cm, the resolution is 1mm, and the data collection interval is adjustable from 1-5000min. It uses solar power, and our company provides two solar panels with built-in battery to store power, which is convenient for normal operation in the field without mains power.


If you are interested in this product, welcome to consult customer service!


Reservoir water automatic measurement and reporting system recommended a good


This paper addresses:https://fengtutec.com/technical/250.html
  • Related products
  • Related articles
Skype Skype whatsapp whatsapp mail mail