Radar Flow Meter

1.Product introduction of Radar Flow Meter

Radar Flow Meter is a water level and velocity detection instrument using microwave technology, which combines the measurement technology of radar water level meter and radar current meter.ML3 radar wave fixed-point online flow measurement is a fully automatic flow telemetry system that can monitor the entire open channel water flow process.This flow measurement system is not affected by temperature, humidity, rainfall, water depth, muddy water, and floating objects on the water surface.It is very suitable for flow testing under water conditions in open channels such as irrigation areas and rivers.

2.Components of Radar Flow Meter

Main components

(1) Three-in-one radar water level, surface velocity and flow rate;

(2) Telemetry terminal RTU;

(3) Solar power supply system;

(4) Pole and bracket;

(5) Lightning protection and grounding.

3.Working principle of Radar Flow Meter

The radar surface velocity meter is based on the principle of pulse radar technology to measure the surface flow velocity of the river water body.It is used in conjunction with the radar water level sensor.It is installed at regular sections of open channels such as rivers and irrigation areas to calculate the flow rate, that is, at the regular section, the measured The speed of the water flowing through the section is measured, and the depth of the water body is measured at the same time.The flow rate of the water flowing through the section is calculated through mathematical geometric principles.

4.Characteristics of Radar Flow Meter flow measurement station

The main feature of the radar surface flow measurement system is to measure flow in a non-contact manner.It mainly consists of a set of three-in-one radar water level, flow, velocity and flow sensors.It is suspended above the channel through pole erection.By measuring the water level, depth and instantaneous measurements of regular sections The surface flow velocity is measured and the flow rate passing through the section at this moment is calculated.The main features are as follows:

(1) Advantages

It adopts non-contact type, can be installed with water, and is not restricted by channel flow and water accumulation;

No water blocking phenomenon;

Not easily affected by debris and floating objects in the channel;

Not affected by water quality and sediment content;

Suitable for channels with fast flow speed and large traffic.

(2) Interference factors

Influence of wind speed: Wind speed can easily cause fluctuations in the water surface, resulting in false alarms and mismeasurements;

Slow flow speed: When the water surface flow speed is slow, the measurement error increases;

Windy and sandy weather: Windy and sandy weather has a greater impact on the signal strength of radar waves, resulting in larger measurement errors;

Heavy rainfall: When encountering heavy rainfall, radar waves are easily affected by the intensity of the rain, resulting in larger measurement errors.

5.Radar Flow Meter technical parameters

water level measurement

Ranging range: 0.1-40 meters

Distance measurement accuracy: ±5mm

Ranging resolution: 1mm

Interval time: 1-5000min

Flow velocity measurement

Ranging range: 0.15～15m/s

Speed measurement accuracy: ±2%

Speed resolution: 0.01m/s

Flow measurement

Flow rate = average flow velocity x flow cross-sectional area x correction coefficient

The average flow velocity is collected by the flow meter and calculated by the model.

The flow cross-sectional area is calculated from the water level measured by the water level gauge and the cross-sectional information.

Rainfall monitoring

Measuring range: Rain intensity 0~4mm/min

Measurement accuracy: ±0.2mm

Resolution: 0.2mm

Rain-bearing diameter: φ200mm

Power supply method: solar panel + battery combination power supply

Solar power: 100W (optional)

Battery parameters: DC3.7V 10Ah

Bracket height: 3 meters for vertical pole and 3 meters for horizontal arm

Working environment: -45℃～85℃ (non-freezing state)