Shandong Fengtu IOT Technology Co., Ltd
Sales Manager:Ms. Emily Wang
Cel,Whatsapp,Wechat:+86 15898932201
Email:info@fengtutec.com
Add:No. 155 Optoelectronic Industry Accelerator, Gaoxin District, Weifang, Shandong, China
Sales Manager:Ms. Emily Wang
Cel,Whatsapp,Wechat:+86 15898932201
Email:info@fengtutec.com
Add:No. 155 Optoelectronic Industry Accelerator, Gaoxin District, Weifang, Shandong, China
Model:FT-LSZ05
Brand:fengtu
1.Product introduction of Pole type water quality monitoring station
Pole type water quality monitoring station monitors PH value, dissolved oxygen, conductivity, ammonia nitrogen, temperature and other parameters of water quality.LSZ05 Pole type water quality monitoring station takes water quality sensors (water temperature, conductivity, PH, dissolved oxygen, ammonia nitrogen) as the core.By monitoring and analyzing various water quality parameters, the collected data is transmitted to the platform side, real-time data remote viewing and remote management of equipment, and at the same time, effective over-limit alarm and intelligent processing of water quality changes.It can also express the comprehensive index of water quality based on the correlation combination between real-time water quality parameters, providing customers with a large amount of objective, detailed and effective data, which is of practical significance to solving water quality pollution problems.
At present, the LSZ05 water quality monitoring station is widely used in aquaculture, sewage treatment, reservoirs, rivers and other places.
2.Pole type water quality monitoring station product features
1.Low-power collector: static power consumption is less than 1mA
2.Standard GPRS networking, support extended Bluetooth, and wired transmission
3.Support modbus485 sensor expansion
4.Solar charging management MPPT automatic power point tracking
5.1.5m carbon steel bracket
6.Send SMS alarm, send SMS to the specified mobile phone after exceeding the limit
7.Stainless steel protective box, corrosion-resistant and oxidation-resistant, waterproof grade IP66
8.No additional processes such as wiring, construction of stations, dispensing agents, and post-maintenance of personnel are required.Compared with the national standard station for water quality monitoring, the observation data is more convenient to use and install, and the observation data is more intuitive.
9.The system can integrate integrated meteorological environment monitoring data
3.Pole type water quality monitoring station system composition
The vertical pole-type online monitoring system is mainly composed of basic support (including vertical pole, floor cage, Stainless steel anti-corrosion and corrosion-resistant protective box), power supply system, monitoring host, water quality sensor, and cloud platform.
4.Pole type water quality monitoring station technical parameters
Serial number | name | Measurement range | Measurement principle | Measurement accuracy | Is it standard? | Remark |
1 | temperature | 0~50℃ | High-precision digital sensor | ±0.3℃ | ✔ | |
2 | pH | 0~14 (ph) | Electrochemistry (salt bridge) | ±0.1PH | ✔ | |
3 | ORP | -1500mv~1500mv | Electrochemistry (salt bridge) | ±6mv | ||
4 | Conductivity | 0~5000uS/cm | Contact electrode method | ±1.5% | ✔ | |
5 | Turbidity | 0~40NTU (low turbidity) | Scattering light method | ±1% | Low turbidity can be customized | |
0~1000NTU (medium turbidity) | Scattering light method | ±1% | Customizable | |||
0~3000NTU (high turbidity) | Scattering light method | ±1% | Default send | |||
6 | Dissolved oxygen | 0~20mg/L | Fluorescence life method | ±2% | ✔ | |
7 | Ammonia nitrogen | 0~100mg/l | Ion Selection Electrode Method | ±1mg | ✔ | |
8 | cod | 0~500mg/L | UV254 absorption method | ±5% | The default turbidity and cod are integrated; it has an automatic cleaner to prevent biological adhesion and avoid light window pollution, so as to ensure that long-term monitoring is still stable; it can set the automatic cleaning time and cleaning times, and the power consumption is 0.7W | |
Turbidity | 0~400NTU | Scattering light method | ±1% | |||
9 | Suspension | 0~2000mg/L | Scattering light method | ±5% (depending on sludge homogeneity) | ||
10 | Chlorophyll | 0~400ug/L | Fluorescence method | R2>0.999 | With automatic cleaner, it can prevent biological adhesion and avoid light window contamination to ensure that long-term monitoring is still stable; it can set automatic cleaning time and cleaning times, and the power consumption is 0.7W |
5.Introduction to Pole type water quality monitoring station cloud platform
1.CS architecture software platform, supports direct observation of mobile phones and PC browsers without additional software installation.
2.Support multiple accounts and multiple devices to log in
3.Support real-time data display and historical data display dashboard
4.Cloud server and cloud data storage are stable and reliable, easy to expand, and load balancing.
5.Support SMS alarm and threshold settings
6.Support map display and viewing device information.
7.Support data curve analysis
8.Support data export table form
9.Supports data forwarding, HJ-212 protocol, TCP forwarding, http protocol, etc.
10.Support data post-processing function
11.Support external running of javascript scripts
Soil is a key natural resource and is vital for crop growth. Crops are affected by dry or excessively wet soils, and economic and social development and climate change have exacerbated the problem of drought, leading to increased water scarcity and associated disaster losses. In hilly and forested a...
weather instrument is mainly used to monitor and record various physical parameters in the atmospheric environment. It is composed of meteorological data acquisition, transmission, analysis and processing system....
Soil is the cornerstone of agriculture, providing crops with the water, nutrients, air and temperature they need to grow. Soil formation is influenced by a number of factors, such as original soil composition, climate, biological action, topography and time of year, as well as human farming activiti...
Most of the new energy research and development work is actually carried out in a relatively open environment, especially for wind and solar energy research and development, often due to the installation of the environment is very open caused by some important devices are easily affected by changes...