Shandong Fengtu IOT Technology Co., Ltd
Sales Manager:Ms. Emily Wang
Cel,Whatsapp,Wechat:+86 15898932201
Email:info@fengtutec.com
Add:No. 155 Optoelectronic Industry Accelerator, Gaoxin District, Weifang, Shandong, China
Sales Manager:Ms. Emily Wang
Cel,Whatsapp,Wechat:+86 15898932201
Email:info@fengtutec.com
Add:No. 155 Optoelectronic Industry Accelerator, Gaoxin District, Weifang, Shandong, China
Model:FT-S14
Brand:fengtu
1. Chloride Ion Sensor Application Environment Description
Chloride Ion Sensor calculates the concentration of chloride ions by measuring the current generated by the REDOX reaction of chloride ions on the inductive electrode.The S14 Chloride Ion Sensor uses an ion-selective electrode to test free chloride ions in water. It is fast, simple and economical, and can meet the measurement requirements of chloride ions in most industrial environments.
Signal output: RS-485 (MODBUS-RTU)
2. Technical Parameters of Chloride Ion Sensor
Measuring principle | Ion selection method |
Output method | RS-485 (MODBUS-RTU) |
Range | 0-3500.0mg/L |
Resolution | 0.1mg/L |
Accuracy | ±5%; ±0.3℃ |
Shell material | ABS |
Cable length | 5m |
Supply voltage | DC12-24V(0.4W@12V) |
Calibration method | Two-point calibration |
Measurement environment | 0-50℃(no freezing) |
Waterproof grade | IP68 |
Installation | Immersion installation, NPT3/4 thread |
3. Chloride Ion Sensor Maintenance and Care
In order to obtain the most stable results, it is recommended to immerse the ion selective electrode in a standard solution (usually 100ppm) for 10-15 minutes before measurement until the reading is stable.
In order to obtain high-precision results, it is recommended to repeat these steps: remove the electrode from the standard solution, rinse, blot dry, and then immerse in the standard solution (immerse for at least 2 minutes to obtain a stable reading) to ensure that the electrode is properly rinsed and pre-conditioned.
When the electrode is used for the first time or after long-term storage, it needs to be soaked in the standard solution overnight or even 48 hours to get a stable reading. After pretreatment, spray the electrode with deionized water and carefully dry it with absorbent paper instead of wiping it dry.
When the sensor is not in use, place it vertically and do not place it horizontally for a long time.
When the sensor is not used for a long time, the electrodes should be kept dry.
A weather phenomenon sensor is a sensor used to measure and identify various weather phenomena in the environment. It can identify the type of precipitation and snowfall and differentiate between weather phenomena such as drizzle, light rain, moderate rain and heavy rain. It can also be equipped wit...
Wind speed and direction sensor, used to measure the instantaneous wind speed and wind direction of the instrument. Commonly used wind cup type wind direction anemometer, and sensor wind speed and wind direction meter.Ultrasonic wind speed and direction meter is wind way technology using ultrasonic...
In recent years, along with the number of cities, the increasing urban population and scientific and technological progress, the speed of promoting the construction of smart cities is also increasing. And the scope of grid monitoring under the concept of smart city can be said to be very large. It c...
What is the significance of rainfall station construction? What role does it play in urban flood control? How to do a good job in rainwater collection, distribution and utilization to provide guarantee for storm disaster prevention? These problems need us to explore constantly.Rainfall gauge station...