Shandong Fengtu IOT Technology Co., Ltd
Sales Manager:Ms. Emily Wang
Cel,Whatsapp,Wechat:+86 15898932201
Email:info@fengtutec.com
Add:No. 155 Optoelectronic Industry Accelerator, Gaoxin District, Weifang, Shandong, China
Sales Manager:Ms. Emily Wang
Cel,Whatsapp,Wechat:+86 15898932201
Email:info@fengtutec.com
Add:No. 155 Optoelectronic Industry Accelerator, Gaoxin District, Weifang, Shandong, China
Model:YW-26B
Brand:fengtu
1.Product Principle of Corrosive Liquid Level Sensor
Corrosive liquid level sensor is a non-contact liquid level sensor for accurate liquid level monitoring of liquids and solids, mostly used for liquid level monitoring of storage tanks.The radar level antenna emits a narrow microwave pulse, which is transmitted downward through the antenna. After the microwave contacts the surface of the measured medium, it is reflected back and received by the antenna system again, and the signal is transmitted to the electronic circuit part and automatically converted into a level signal (because the microwave propagation speed is extremely fast, the time taken for the electromagnetic wave to reach the target and return to the receiver through reflection is almost instantaneous).
2. Corrosive liquid level sensor technical parameters
Product features: PTFE cone antenna
Typical applications: liquids, powders, high-sanitation situations, situations prone to crystallization, condensation, and adhesion of oil smoke and dust, etc.
Measuring range: 30 meters
Antenna material: PTFE (optional)
Accuracy: ±5mm
Process temperature: -40~260℃
Process pressure: -0.1~4.0Mpa
Power supply: 24vDC (two-wire, four-wire)
Signal output: 4~20mA/Har (two-wire/four-wire)
RS485/Modbus
Process connection: flange (≥DN50 optional)
Protection level: IP67
Frequency range: 26GHz
Protection level: IP67
Explosion-proof grade: ExiaⅡC T6 Ga/Exd ia IIC T6 Gb
On-site display: LED (standard)
Cable entry: M20*1.5, ½NPT (optional)
Shell material: cast aluminum, 304 stainless steel (optional)
3. Features of Corrosive liquid level sensor
The antenna is small in size and easy to install; it is a non-contact radar, without wear and pollution.
Almost unaffected by corrosion and foam; almost unaffected by water vapor, temperature and pressure changes in the atmosphere.
Severe dust environment has little effect on the operation of high-frequency level meters.
The shorter the wavelength, the better the reflection from inclined solid surfaces.
The small beam angle and concentrated energy enhance the echo capability while helping to avoid interference.
The measurement blind area is smaller, and good results can be achieved even for small tank measurements.
High signal-to-noise ratio for better performance even under fluctuating conditions.
High frequency, the best choice for measuring solids and low dielectric constant media.
A good atmospheric visibility meter should be able to provide accurate measurement data and stable operation even under adverse weather conditions. It should be robust, easy to install and maintain, and have an intuitive user interface that makes it easy for users to read and analyse data. In additi...
Sensor technology is developing rapidly and is widely used, especially in the field of consumer electronics. In agriculture, however, the pace of application of this technology has been relatively slow. Modern greenhouses, for example, are typically equipped with only one sensor per 1,000 square met...
With the intensification of global climate change, climate anomalies are frequent, and extreme weather events such as heavy rainfall and flooding occur from time to time, posing great challenges to the construction and development of cities and villages. Under such circumstances, the protection of t...
What are the components of a forest weather station? We are all familiar with forest fires, which bring significant losses to people's property, and forest weather stations provide a reference data base for forest fire prevention.The forest weather station consists of the following parts, sensor...