Shandong Fengtu IOT Technology Co., Ltd
Sales Manager:Ms. Emily Wang
Cel,Whatsapp,Wechat:+86 15898932201
Email:info@fengtutec.com
Add:No. 155 Optoelectronic Industry Accelerator, Gaoxin District, Weifang, Shandong, China
Sales Manager:Ms. Emily Wang
Cel,Whatsapp,Wechat:+86 15898932201
Email:info@fengtutec.com
Add:No. 155 Optoelectronic Industry Accelerator, Gaoxin District, Weifang, Shandong, China
Model:FT-YGT1
Brand:fengtu
1.Flue dust transmittance detector measurement principle
Flue dust transmittance detector A device used to measure the light transmittance and dust concentration of the environment and pipes.The detection light crosses the flue, and the single optical path measurement system consists of two parts: the transmitter and the receiver. A high-brightness LED light source is installed in the transmitter, which emits a light beam through the diffuser and then through the flue, projecting it onto the focusing lens in the receiver and focusing it on the measuring detector; the other part is directly focused on the reference detector. By calculating the ratio of the signal intensity obtained on the two detectors, the light transmittance or light opacity value can be obtained, from which the light transmittance (or light opacity) and dust concentration value can be obtained.
2. Main features of Flue dust transmittance detector
Direct continuous measurement
Small size, light weight, compact structure
Directly display light transmittance or opacity
With lens contamination monitoring and compensation device
Automatic calibration and manual calibration, convenient and flexible
Measuring path 0.5-5 meters
With air purge passage
Long life LED signal light source
No moving parts - low maintenance
Easy installation and debugging
3. Flue dust transmittance detector technical parameters
How it works | Crossing the flue, single light path transmission |
light source | High brightness LED |
Response time | 3 seconds to reach 98% of the final value |
Measuring range | Light transmittance 0-99.99% |
Resolution | 0.01% |
Detectable gas | Smoke, fumes or related dusty gases |
Optical path length | 0.3-2m standard (other lengths can be customized) |
Average time | 1-59 seconds |
Calibration and calibration | Manual calibration and calibration (with calibrator) |
show | LCD display |
Analog Output | 4-20mA current loop |
Digital Output | RS485/232 |
Relay output | Two-way switch output (alarm value setting) |
Operating temperature | -20-50°C |
Operating humidity | 0-99% (non-condensing) |
Supply voltage | 220VAC; optional 12, 24VDC |
Power consumption | Maximum transceiver system 18W |
vibration | 2Hz-60Hz, maximum amplitude 2mm |
Housing Material | Die-cast aluminum |
Protection level | IP67 |
Fengtu Air quality monitoring station provides accurate data support for air quality monitoring through automation technology. The system is capable of real-time monitoring of a wide range of key pollutants in the atmosphere (e.g. SO2, NO2, CO, O3, TVOC, PM2.5, PM10) as well as meteorological parame...
What is the significance of rainfall station construction? What role does it play in urban flood control? How to do a good job in rainwater collection, distribution and utilization to provide guarantee for storm disaster prevention? These problems need us to explore constantly.Rainfall gauge station...
With the acceleration of urbanization, smart city has become an important development direction for future city construction. Smart light poles as an important part of the smart city, its environmental sensors in the realization of intelligent lighting at the same time, but also for the city's e...
The rapid development of industry and urbanisation has brought about the global challenge of air pollution, which poses a serious threat to human health and the ecological balance. In response to this problem, countries and regions are introducing stricter environmental protection policies to streng...